Silicone emulsion with multicomponent block copolymer 

Technical Index

AppearanceTransparent or translucent liquid with light blue
Light yellow transparent or translucent viscous liquid23.0-25.0
PH Value (1% water solution)4.0-6.0
IonicWeak Cationic
SolubilitySoluble in water

Features and Advantages

1. Can give the fabric fluffy and plump, with slippery feel effect, good elasticity, dry and non-sticky hand.            

2. Excellent compatibility, can be used in the same bath with other cationic or nonionic additives.            

3. Low yellowing property, suitable for white/light color fabrics


It is suitable for soft finishing of all kinds of plush fabrics, especially for flannel. 


Dissolution: Ratio: WF-8205N: water = 1:1.5 or so. Dissolve the material in cold water, first put the crude oil, then open the blender, then add 0.1 water, 0.2, 0.3, 0.4, 0.5 parts every half an hour, then get the transparent emulsion, stop stirring, filter out the material.

1. Impregnation method: 

Dosage: 1.0-1.5% (o.w.f), impregnated at room temperature for about 20-30 minutes, and then dehydrated and drying or setting.

2. Dip-rolling method:

Dosage: 10-15g/L, one-dip-one-rolling(or two-dip-two-rolling) and then drying or  setting.  

Users are requested to adjust the dosage through the sample as appropriate.


100/120KG Plastic Drum or other packing on request. Sealed and light-proof storage. 

Shelf life

12 months.